171 This entry may only be used when the material is transported in non-friable tablet form or for granular or powered mixtures that have been shown to meet the PG III criteria in 173.127. A current copy of CGA pamphlet, CGA C-6 must be available at the facility servicing the life-saving appliance. 125 Lactose or glucose or similar materials may be used as a phlegmatizer provided that the substance contains not less than 90%, by mass, of phlegmatizer. . Flammable components are flammable liquids and liquid mixtures, flammable solids and solid mixtures or flammable gases and gas mixtures meeting the following criteria: (1) A flammable liquid is a liquid having a flashpoint of not more than 93 C (200 F); (2) A flammable solid is a solid that meets the criteria in 173.124 of this subchapter; or. Used or spent dry batteries of both non-rechargeable and rechargeable designs, with a marked rating up to 9-volt that are combined in the same package and transported by highway or rail for recycling, reconditioning, or disposal are not subject to this special provision or any other requirement of the HMR. Unlined tanks must be passivated before being placed in service. This entry does not apply to life saving appliances described in 173.219 (UN2990 and UN3072). 136 This entry applies only to articles, machinery, and apparatus containing hazardous materials as an integral element of the article, machinery, or apparatus. Date of the visual inspection must be stenciled on the tank near the other required markings. B132 Except for transportation by aircraft, UN2813, Water reactive solid, n.o.s. e. Transport in accordance with this special provision must be noted on the shipping paper. 128 Regardless of the provisions of 172.101(c)(12), aluminum smelting by-products and aluminum remelting by-products described under this entry, meeting the definition of Class 8, Packing Group II and III may be classed as a Division 4.3 material and transported under this entry. (2) An indication of compliance with this special provision must be provided by marking each package with the words not restricted or by including the words not restricted on a transport document such as an air waybill accompanying the shipment. If you have questions for the Agency that issued the current document please contact the agency directly. 142 These hazardous materials may not be classified and transported unless authorized by the Associate Administrator. N5 Glass materials of construction are not authorized for any part of a packaging which is normally in contact with the hazardous material. When the word Normal is indicated, 178.275(g)(3) of this subchapter does not apply. TP22 Lubricants for portable tank fittings (for example, gaskets, shut-off valves, flanges) must be oxygen compatible. Solids meeting the definition of an elevated temperature material must be transported in accordance with the applicable requirements of this subchapter. The rechargeable lithium ion cells can only be charged from the primary lithium metal cells; ii. 200 Division 1.4G consumer fireworks may be certified for transportation by a DOT-approved Fireworks Certification Agency in accordance with the provisions of 173.65 of this subchapter. f. Flexible: 13H2, 13H3, 13H4, 13H5, 13L2, 13L3, 13L4, 13M1 and 13M2 (flexible IBCs must be sift-proof and water resistant or must be fitted with a sift-proof and water resistant liner). The packing group assignment and packaging must be approved by the Associate Administrator for Hazardous Materials Safety on the basis of the criteria in 173.21 of this subchapter and the package type used for the Series 6(c) test. b. 157 When transported as a limited quantity or a consumer commodity, the maximum net capacity specified in 173.151(b)(1)(i) of this subchapter for inner packagings may be increased to 5 kg (11 pounds). B80 Each cargo tank must have a minimum design pressure of 276 kPa (40 psig). Components classed as Division 6.1, Packing Group I, or Class 8, Packing Group I, must not be offered for transportation and transported under this description. An installed inflation cylinder that requires recharging must be filled in accordance with 173.301(l). 110 Fire extinguishers transported under UN1044 and oxygen cylinders transported for emergency use under UN1072 may include installed actuating cartridges (cartridges, power device of Division 1.4C or 1.4S), without changing the classification of Division 2.2, provided the aggregate quantity of deflagrating (propellant) explosives does not exceed 3.2 grams per cylinder. Other inorganic nitrate salts may replace part of the ammonium nitrate. Dry sodium cyanide or potassium cyanide is also permitted in siftproof, water-resistant, fiberboard IBCs when transported in closed freight containers or transport vehicles. Bulk outer packagings must be liquid tight through design or by the use of lining materials. They will appear as a list of codes that are defined in 172.102 of the Code of Federal Regulations. Shipment of packages under this special provision must be made by private or contract motor carrier. (2) A code containing the letter A refers to a special provision which applies only to transportation by aircraft. Table 3 authorizes Large Packagings for specific proper shipping names through the use of IB Codes assigned in the 172.101 table of this subchapter. Uranium hexafluoride may be classified under this entry only if the conditions of 173.420(a)(4) and (6) and (d) and 173.421(b) and (d) of this subchapter, and, for fissile-excepted material, the conditions of 173.453 of this subchapter are met. 343 A bulk packaging that emits hydrogen sulfide in sufficient concentration that vapors evolved from the sour crude oil can present an inhalation hazard must be marked as specified in 172.327. TP9 A hazardous material assigned to special provision TP9 in Column (7) of the 172.101 Table may only be transported in a portable tank if approved by the Associate Administrator. b. Specifically, you seek clarification on the implementation of special provision IP15which is listed in Column 7 of the 172.101 Hazardous Materials Table (HMT)as it applies when this material is packaged in a composite intermediate bulk container (IBC) with a rigid inner receptacle. Column 7 specifies codes for special provisions applicable to hazardous materials. 32 Polymeric beads and molding compounds may be made from polystyrene, poly(methyl methacrylate) or other polymeric material. 155 Fish meal, fish scrap and krill meal may not be transported if the temperature at the time of loading either exceeds 35 C (95 F), or exceeds 5 C (41 F) above the ambient temperature, whichever is higher. 385 Notwithstanding the provisions of 177.834(l) of this subchapter, cargo heaters may be used when weather conditions are such that the freezing of a wetted explosive material is likely. Comparative fire testing between a package as prepared for transport (including the substance to be transported) and an identical package filled with water must show that the maximum temperature measured inside the packages during testing does not differ by more than 200 C (392 F). A single packaging of a 4C2 sift-proof, natural wood box; or. Such articles must comply with the following requirements: (1) The water capacity of the pressure receptacle must not exceed 0.5 L and the working pressure must not exceed 25 bar at 15 C (59 F); (2) The minimum burst pressure of the pressure receptacle must be at least four times the pressure of the gas at 15 C (59 F); (3) Each article must be manufactured in such a way that unintentional firing or release is avoided under normal conditions of handling, packing, transport and use. B85 Cargo tanks must be marked with the name of the lading in accordance with the requirements of 172.302(b). 144 If transported as a residue in an underground storage tank (UST), as defined in 40 CFR 280.12, that has been cleaned and purged or rendered inert according to the American Petroleum Institute (API) Standard 1604 (IBR, see 171.7 of this subchapter), then the tank and this material are not subject to any other requirements of this subchapter. 368 In the case of non-fissile or fissile-excepted uranium hexafluoride, the material must be classified under UN3507 or UN2978. 55 This device must be approved in accordance with 173.56 of this subchapter by the Associate Administrator. Quantities of not more than 500 g per package with not less than 10 percent water by mass may also be classed in Division 4.1, provided a negative test result is obtained when tested in accordance with test series 6(c) of the UN Manual of Tests and Criteria (IBR, see 171.7 of this subchapter). Portable tanks must be hydraulically tested and internally inspected at intervals not exceeding 2.5 years. The portable tank must not be used if the wall thickness is less than that prescribed by the applicable T code in Column (7) of the Table for this material. TP36 For material assigned this portable tank special provision, portable tanks used to transport such material may be equipped with fusible elements in the vapor space of the portable tank. Radiation detectors transported as individual components must be transported as follows: (1) They must be packed in a sealed intermediate plastic liner with sufficient absorbent or adsorbent material to absorb or adsorb the entire gas contents. TP6 The tank must be equipped with a pressure release device which prevent a tank from bursting under fire engulfment conditions (the conditions prescribed in CGA pamphlet S-1.2 (see 171.7 of this subchapter) or alternative conditions approved by the Associate Administrator may be used to consider the fire engulfment condition), taking into account the properties of the hazardous material to be transported. This contact form is only for website help or website suggestions. (iii) Constructing the battery with terminals that are recessed or otherwise protected so that the terminals will not be subjected to damage if the package is dropped. 118 This substance may not be transported under the provisions of Division 4.1 unless specifically authorized by the Associate Administrator (see UN0143 or UN0150 as appropriate). 168 For lighters containing a Division 2.1 gas (see 171.8 of this subchapter), representative samples of each new lighter design must be examined and successfully tested as specified in 173.308(b)(3). A35 This includes any material which is not covered by any of the other classes but which has an anesthetic, narcotic, noxious or other similar properties such that, in the event of spillage or leakage on an aircraft, extreme annoyance or discomfort could be caused to crew members so as to prevent the correct performance of assigned duties. A stimulating mechanism must be used to initiate one article in the middle of the packaging. The HMT consists of 10 columns and provides information for each hazardous material listed. Each IBC may not exceed a maximum net quantity of 1,000 kg: a. Such packages must be transported on cargo aircraft only. It is not an official legal edition of the CFR. The Associate Administrator will base the authorization on results from Series 2 tests and a Series 6(c) test from the UN Manual of Tests and Criteria (IBR, see 171.7 of this subchapter) on packages as prepared for transport in accordance with the requirements of this subchapter. (ii) The following table specifies the portable tank requirements applicable to T Codes T1 through T22. The battery has been tested as a primary lithium battery; and. 135 Internal combustion engines installed in a vehicle must be described using Vehicle, flammable gas powered or Vehicle, flammable liquid powered, as appropriate. However this examination is required when the conditions of 180.605(f) are met. B42 Tank cars constructed before March 16, 2009, must have a test pressure of 34.47 Bar (500 psig) or greater and conform to Class 105J. When a plus sign is assigned to mix- Each special provision is indicated using a numeric or alphanumeric code. This molecular arrangement is exactly the same as that for dithioketo QA [5]. This training must be documented in training records required by 172.704(d). When a consignment is undeliverable, the consignment shall be placed in a safe location and the appropriate competent authority shall be informed as soon as possible and a request made for instructions on further action. N86 UN pressure receptacles made of aluminum alloy are not authorized. B28 Packagings must be made of stainless steel. TP26 The heating device must be exterior to the shell. The letter codes are placed in front of the number codes (for example, "A29"). 81 Polychlorinated biphenyl items, as defined in 40 CFR 761.3, for which specification packagings are impractical, may be packaged in non-specification packagings meeting the general packaging requirements of subparts A and B of part 173 of this subchapter. This device must also prevent an unacceptable amount of leakage of liquid in the case of overturning. An unused lighter or a lighter that is cleaned of residue and purged of vapors is not subject to the requirements of this subchapter. Do not enter until vapors have dissipated. The driver of the transport vehicle and the consignee(s) must be trained not to enter the transport vehicle until the ammonia vapors have dissipated, and the emergency response information on the shipping paper must indicate that the vehicle contains ammonia vapors. TP8 A portable tank having a minimum test pressure of 1.5 bar (150 kPa) may be used when the flash point of the hazardous material transported is greater than 0 C (32 F). Symbols, if used, must be registered with the Associate Administrator. (2) To the extent a special provision imposes limitations or additional requirements on the packaging provisions set forth in column 8 of the 172.101 table, packagings must conform to the requirements of the special provision. (4) Each detector must be tested to a 1 1010 cm3/s leaktightness standard before filling. (a) General. Interpretation Response Details. Column 4 specifies the applicability of 178.275(g)(3) of this subchapter for the pressure relief devices. 146 This description may be used for a material that poses a hazard to the environment but does not meet the definition for a hazardous waste or a hazardous substance, as defined in 171.8 of this subchapter, or any hazard class, as defined in part 173 of this subchapter, if it is designated as environmentally hazardous by another Competent Authority. Radiation detection systems containing such detectors are not subject to any other requirements of this subchapter provided they are packed in accordance with paragraph c of this special provision. Multiple provisions can be listed in this column. B90 Steel tanks conforming or equivalent to ASME specifications which contain solid or semisolid residual motor fuel antiknock mixture (including rust, scale, or other contaminants) may be shipped by rail freight or highway. Prohibited means bottom openings are prohibited, and Prohibited for liquids means bottom openings are authorized for solid material only. If unlined tanks are washed out with water, they must be repassivated prior to return to service. TP40 The portable tank must not be transported when connected with spray application equipment. R1 A person who offers for transportation tank cars containing sulfur, molten or residue of sulfur, molten may reference the Sulfur Institute's, Molten Sulphur Rail Tank Car Guidance document (see 171.7 of this subchapter) to identify tank cars that may pose a risk in transportation due to the accumulation of formed, solid sulfur on the outside of the tank. B78 Tank cars must have a test pressure of 4.14 Bar (60 psig) or greater and conform to Class 103, 104, 105, 109, 111, 112, 114 or 120. d. Except for transportation by aircraft, neutron radiation detectors and radiation detection systems containing such detectors transported in accordance with paragraph a of this special provision are not subject to the labeling and placarding requirements of part 172 of this subchapter. N85 Packagings certified at the Packing Group I performance level may not be used. The manufacturer must produce technical documentation of the design type, manufacture as well as the tests and their results. Each reference in this column to a material which is a hazardous waste or a hazardous substance, and whose proper shipping name is preceded in Column 1 of the Table by the letter "A" or "W", is modified to include " 173.203" or " 173.213", as appropriate for liquids and solids, respectively, on those occasions when the . (9) A code containing the letter W refers to a special provision that applies only to transportation by water. Solid substances transported or offered for transport above their melting point are authorized for transportation in portable tanks conforming to the provisions of portable tank instruction T4 for solid substances of packing group III or T7 for solid substances of packing group II, unless a tank with more stringent requirements for minimum shell thickness, maximum allowable working pressure, pressure-relief devices or bottom outlets are assigned in which case the more stringent tank instruction and special provisions shall apply. Wall thickness must be verified ultrasonically at intervals midway between periodic hydraulic tests (every 2.5 years). or existing codification. Openings for safety relief devices on multi-unit tank car tanks shall be plugged or blank flanged. These detectors must have a minimum burst pressure of 1800 kPa as demonstrated by design type qualification testing; and. 360 Vehicles powered only by lithium batteries must be described using UN3171, Battery-powered vehicle. Lithium batteries installed in a cargo transport unit, designed only to provide power external to the transport unit, must be described using UN3536, Lithium batteries installed in a cargo transport unit., 361 Capacitors with an energy storage capacity of 0.3 Wh or less are not subject to the requirements of this subchapter. The fiber drum must to be fabricated with a three ply wall, as a minimum. For all modes of transportation, a written report submitted, retained, and updated in accordance with 171.16 is required if a fire, violent rupture, explosion or dangerous evolution of heat occurs as a direct result of a dry battery or battery-powered device. This content is from the eCFR and is authoritative but unofficial. The tank car specification may be marked to indicate a test pressure of 13.79 Bar (200 psig). b. A54 Irrespective of the quantity limits in Column 9B of the 172.101 table, a lithium battery, including a lithium battery packed with, or contained in, equipment that otherwise meets the applicable requirements of 173.185, may have a mass exceeding 35 kg if approved by the Associate Administrator prior to shipment. Only Specifications MC 304, MC 307 or DOT 407 cargo tank motor vehicles are authorized for transportation by vessel. The tank must have been designed and constructed to be capable of withstanding full vacuum. 371 a. (4) A code containing the letters IB or IP refers to a special provision that applies only to transportation in IBCs. In addition, the column 5 reference is modified to read III on those occasions when this material is offered for transportation or transported by highway or rail. 50 Cases, cartridge, empty with primer which are made of metallic or plastic casings and meeting the classification criteria of Division 1.4 are not regulated for domestic transportation. (8) A code containing the letters TP refers to a portable tank special provision for UN or IM Specification portable tanks that is in addition to those provided by the portable tank instructions or the requirements in part 178 of this subchapter. Portable tank special provisions are assigned to certain hazardous materials to specify requirements that are in addition to those provided by the portable tank instructions or the requirements in part 178 of this subchapter. These special provisions are in addition to the standard packaging requirements. The adsorption or absorption presents the following properties: (1) The pressure at a temperature of 20 C (68 F) in the receptacle is less than 0.6 bar (60 kPa); (2) The pressure at a temperature of 35 C (95 F) in the receptacle is less than 1 bar (100 kPa); (3) The pressure at a temperature of 85 C (185 F) in the receptacle is less than 12 bar (1200 kPa). b. These requirements must be met in addition to the design and construction specifications in part 178 of this subchapter. Portable tank special provisions are designated with the abbreviation TP (tank provision) and are assigned to specific hazardous materials in Column (7) of the 172.101 Table. DOT Specification 57 port-able tanks used for the transport by vessel of Class 3, Packaging Group II materials must conform to the fol-lowing: (1) Minimum design pressure. When portable tank instruction T75 is referenced in Column (7) of the 172.101 Table, the applicable refrigerated liquefied gases are authorized to be transported in portable tanks in accordance with the requirements of 178.277 of this subchapter. Limited propagation means that if one booster near the center of the package is exploded, the aggregate weight of explosives, excluding ignition and delay charges, in this and all additional boosters in the outside packaging that explode may not exceed 25 g. 116 Fuzes, detonating may be classed in Division 1.4 if the fuzes do not contain more than 25 g of explosive per fuze and are made and packaged so that they will not cause functioning of other fuzes, explosives or other explosive devices if one of the fuzes detonates in a shipping packaging or in adjacent packages. Use the above summary to assist you in reviewing the special provisions applicable to the HazMat you offer for transportation. 380 For transportation by private carrier in a motor carrier only, this material is not subject to the segregation requirements of 177.848(d) of this subchapter under the following conditions: a. Examples of such vehicles are electrically-powered cars, motorcycles, scooters, three- and four-wheeled vehicles or motorcycles, trucks, locomotives, bicycles (pedal cycles with an electric motor) and other vehicles of this type (e.g., self-balancing vehicles or vehicles not equipped with at least one seating position), lawn tractors, self-propelled farming and construction equipment, boats, aircraft, wheelchairs and other mobility aids. full text search results b. Gases of Division 2.3 and gases with a subsidiary risk of 5.1 must not be used as a propellant in a chemical under pressure. This entry also applies to articles not conforming to the requirements of 173.302, 173.304, or 173.306 of this subchapter, containing a small pressure receptacle with a release device. 172.101 Hazardous Materials Table (HMT). On the basis of the results of suitable burning rate tests, and taking into account the standard tests in the UN Manual of Tests and Criteria, Part III, subsection 33.2.1 (IBR, see 171.7 of this subchapter), nitrocellulose membrane filters in the form in which they are to be transported that do not meet the criteria for a Division 4.1 material are not subject to the requirements of this subchapter. W7 Vessel stowage category for uranyl nitrate hexahydrate solution is D as defined in 172.101(k)(4). The Packing Group assigned will be II or III, according to the classification criteria for either Class 3 or Division 4.1, as appropriate, applied to the base material. This content is from the eCFR and may include recent changes applied to the CFR. 5 If this material meets the definition for a material poisonous by inhalation (see 171.8 of this subchapter), a shipping name must be selected which identifies the inhalation hazard, in Division 2.3 or Division 6.1, as appropriate. the hierarchy of the document. Pressing enter in the search box The packaging shall be designed for a working temperature of at least 121 C (250 F). (5) A code containing the letter N refers to a special provision which applies only to non-bulk packaging requirements. 182 Equipment containing only lithium batteries must be classified as either UN 3091 or UN 3481. package). c. The cylinders are collected and transported by a private or a contract carrier for reconditioning, reuse or disposal. B35 Tank cars containing hydrogen cyanide may be alternatively marked Hydrocyanic acid, liquefied if otherwise conforming to marking requirements in subpart D of this part. The guns are packaged in accordance with Packing Method US 1 as specified in 173.62 of this subchapter. 177 Gasoline, or, ethanol and gasoline mixtures, for use in internal combustion engines (e.g., in automobiles, stationary engines and other engines) must be assigned to Packing Group II regardless of variations in volatility. 12 In concentrations greater than 40 percent, this material has strong oxidizing properties and is capable of starting fires in contact with combustible materials. The toy plastic or paper caps must be in the form of sheets, strips, rolls, or individual caps; b. Refrigerated liquefied gases that are authorized to be transported in portable tanks are specified in tank instruction T75. 22 If the hazardous material is in dispersion in organic liquid, the organic liquid must have a flash point above 50 C (122 F). 119 This substance, when in quantities of not more than 11.5 kg (25.3 pounds), with not less than 10 percent water, by mass, also may be classed as Division 4.1, provided a negative test result is obtained when tested in accordance with test series 6(c) of the UN Manual of Tests and Criteria (IBR, see 171.7 of this subchapter). 64 The group of alkali metals includes lithium, sodium, potassium, rubidium, and caesium. The tank car specification may be marked to indicate a test pressure of 13.79 Bar (200 psig). Be ASME Code (U) stamped for 100% radiography of all pressure-retaining welds; b. b. The material is also be subject to operational controls which include not exceeding a temperature of 55C (130F) at the time it is offered or during transportation, not exceeding a transportation time of 24 hours, and drivers transporting spent bleaching earth must be trained in the properties and hazards of the spent bleaching earth. For continued use of approvals dated prior to January 1, 2012, see 173.308(b)(5). The inlet to the venting device must be located in the vapor space of the IBC under maximum filling conditions. TP47 The 2.5 year internal examination may be waived or substituted by other test methods or inspection procedures specified by the competent authority or its authorized body, provided that the portable tank is dedicated to the transport of the organometallic substances to which this tank special provision is assigned. A 25 mm (1 inch) woven lining of asbestos or other approved material must be placed between the bolster slabbing and the bottom of the tank. In addition, there are over 300 numeric codes provisions. 342 Glass inner packagings (such as ampoules or capsules) intended only for use in sterilization devices, when containing less than 30 mL of ethylene oxide per inner packaging with not more than 300 mL per outer packaging, may be transported in accordance with 173.4a of this subchapter, irrespective of the restriction of 173.4a(b) and the indication of forbidden in columns (9A) and (9B) of the 172.101 table provided that: a. Dry batteries specifically covered by another entry in the 172.101 Table must be transported in accordance with the requirements applicable to that entry. If a fuel cell engine is installed in a vehicle, the vehicle must be described using Vehicle, fuel cell, flammable gas powered or Vehicle, fuel cell, flammable liquid powered, as appropriate. B68 Sodium must be in a molten condition when loaded and allowed to solidify before shipment. A11 For combination packagings, when metal inner packagings are permitted, only specification cylinders constructed of metals which are compatible with the hazardous material may be used. Cargo heaters must be reverse refrigeration (heat pump) units. Explosives shipped in conformance with this paragraph must have been examined in accordance with 173.56 of this subchapter and approved by the Associate Administrator. (a) The Hazardous Materials Table . 123 Any explosives, blasting, type C containing chlorates must be segregated from explosives containing ammonium nitrate or other ammonium salts. Filling limits must be in accordance with portable tank special provision TP3. TP20 This hazardous material must only be transported in insulated tanks under a nitrogen blanket. Lighter refills offered for transportation under this entry may not exceed 4 fluid ounces capacity (7.22 cubic inches) or contain more than 65 grams of fuel. The total weight of the explosive contents of the shaped charges assembled in the guns does not exceed 90.5 kg (200 pounds) per vehicle; and. 45 Temperature should be maintained between 18 C (64.4 F) and 40 C (104 F). These provisions can be classified even further with each form of transportation.
Fiskars Up53 Rope Change,
Jake Conroy Hawaii,
Peter Gunz Ethnicity,
Mohave County Property Legal Description,
Articles C